Sulphidisation of Oxidised PGM Ores to Improve Flotation Kinetics

Authors

  • Patricia K Mashero Author
  • Nancy Mabwe Author

Keywords:

oxidised ore, sulphidisation, PGM, recovery, floatation

Abstract

Research has shown that oxidised Platinum Group Metal (PGM) ores are not amenable to conventional
sulphide froth flotation. This is attributed to the oxide layer that is hydrophilic in nature, resulting in
poor flotation recoveries and high reagent consumption. As a result, oxidised PGM ores are either left
in situ, stockpiled or discarded as waste, presenting a huge resource base that can be exploited given
the rapid depletion of pristine (fresh sulphide ores). This necessitates continued research into the
processing of oxidised PGM ores. This study was carried out in order to investigate the feasibility of
the sulphidisation pre-treatment technique on oxidised PGM ores from a platinum mine in Zimbabwe.
The study will contribute to research on alternative techniques that can be employed on oxidised
PGM ores. A sample of oxidised ore was obtained from the mine open pit and sulphidised using
sodium hydrosulfide (NaHS). Sulphidisation of oxidised ores has been proposed by other researchers
as a technique that can enhance flotation kinetics. The addition of a sulphidising agent aims to restore
the floatability of the oxidised ores by converting the surface oxides into sulphides. The results of the
study showed that sulphidisation of the oxidised PGM ores works efficiently at NaHS dosage of 75
g/t, yielding a recovery of 80% 4E (platinum, palladium, rubidium and gold), whilst unsulphidised ore
had a recovery of 40% 4E. This shows the potential of sulphidisation as a viable method to enhance
the floatability of oxidised PGM ores.

Downloads

Published

2025-12-31